search

Original EBC Pinball

Original Eyebrow Controlled Pinball using FaceOSC, Arduino & Puredata.

hashtag
Eyebrow Controlled Pinball

hashtag
Parts

  • Lasercut Parts

  • MiniServo 180 Servo Motors

  • Arduino Uno Rev 3

  • M4 30mm Bolts & Nuts

  • Micro USB Cable

hashtag
Assembly

  1. Cut parts A-D.

  2. Insert bolts.

  3. Mount servos to back.

  4. Superglue flippers (D) to servo arms.

  5. Wire servos to arduino.

  6. Install & run softwares via Github.

hashtag
Software

FaceOSC: https://github.com/kylemcdonald/ofxFaceTracker/releasesarrow-up-right

Puredata Extended: https://puredata.info/downloads/pd-extendedarrow-up-right

Arduino: https://www.arduino.cc/en/Main/Softwarearrow-up-right

PreviousIDEAS BOOK.NextEBC Fruit Slicer

Last updated